Darnell runs IT for a 30-person architecture firm in Phoenix. A partner picked up twelve iPhones at a carrier store on a Saturday and dropped them on his desk Monday morning. Darnell opened Apple Business, went to Devices, and found nothing. The phones were not there. He needed to add Apple device to Apple Business Manager records for all twelve. Staff were taking them home that night.
That gap catches a lot of teams. Devices bought straight from Apple, or from a reseller linked to your account, show up on their own. A phone from a retail store does not. To get it in, you have three routes: link the seller so the order flows in, add it by hand with Apple Configurator, or let a staff member enroll it by signing in with a work account. Each has a trade-off, and the Configurator route erases the device. The right choice depends on who owns the device and where it was bought.
To add an Apple device to Apple Business Manager, now Apple Business, link your Apple Customer Number or reseller so purchases appear automatically. For devices bought elsewhere, use Apple Configurator on an iPhone or Mac, which erases the device and adds it to your inventory. Staff can also enroll a device by signing in with a Managed Apple Account.
How to Add Apple Device to Apple Business Manager: The Three Routes
There are three ways to add an Apple device to Apple Business Manager. Devices bought from Apple, an Apple Authorized Reseller or an authorized carrier appear automatically once you link that supplier. Devices bought anywhere else can be added by hand with Apple Configurator. A staff member can also add a device by signing in with a Managed Apple Account.
| Route | Best for | Erases the device? |
|---|---|---|
| Linked supplier (Apple, reseller or carrier) | New purchases and many past orders | No |
| Apple Configurator on iPhone or Mac | Devices bought at retail, online or second hand | Yes |
| User sign-in with a Managed Apple Account | Devices staff already use | No |
Apple Business Manager became Apple Business on April 14, 2026. The device steps carried over. Apple’s device workflow page lists the same three sources (Apple Business User Guide, Device workflow). If you are still setting up your account, start with our guide to Apple Business Manager enrollment.
Add, assign and enroll are three steps
Apple uses three words that sound alike. Add means the device is recorded in your inventory. Assign means it is linked to a device management service. Enroll means it actually joins that service, which happens during setup or when a user signs in. A device can be added but not assigned, and then nothing happens on the device itself.
Pick the route by asking two questions. Who owns the device, the company or the employee? And where was it bought? Company-owned and bought through a linked seller means Route 1. Company-owned but bought elsewhere means Route 2. Employee-owned, or already in daily use, means Route 3.
Which devices qualify
Apple’s requirements page says devices added through Apple, a reseller or a carrier must have been ordered after March 1, 2011, and must meet minimum operating system requirements. Manual adding covers iPhone, iPad, Mac, Apple TV models with Ethernet and Apple Vision Pro. That rules out very old hardware.
Route 1: Link Your Supplier So Devices Appear Automatically
To have devices appear on their own, add your Apple Customer Number or your reseller’s Reseller Number under Devices, then Inventory. For resellers and carriers, also give them your Organization ID. Once both sides are linked, the reseller submits your orders and the devices show up in your inventory.
- Sign in with a role that can add Apple Customer Numbers and Reseller Numbers.
- Go to Devices, then Inventory, and select Get Started.
- Choose the number type and enter it. Leave out leading zeros in an Apple Customer Number.
- For a reseller or carrier, share your Organization ID from Settings, then Organization.
- Ask the reseller or carrier to submit your orders through its own portal.
Apple’s supplier page is clear that the reseller must submit the orders. It does not happen automatically after the numbers are exchanged (Apple Business User Guide, Manage device suppliers).
Can a reseller add devices you bought earlier?
Often, yes. Apple’s requirements page says the reseller’s or carrier’s own sales history sets the eligibility date. In a 2023 Apple Community thread, one admin said a reseller had submitted invoices going back years. Treat that as one person’s experience, and ask your reseller what it can submit.
Here is the practical habit that saves the most time. Buy every future company device through one reseller or carrier you have linked. Then new devices land in your inventory with no extra work, and nobody has to erase anything.
Where to find your numbers
Your Apple Customer Number comes from your purchasing agent, finance team or Apple account contact. Apple notes it is different from a GSX account number. A Reseller Number comes from the reseller or carrier. Your Organization ID sits under Settings, then Organization, in Apple Business.
Route 2: Add Devices With Apple Configurator
Apple Configurator adds devices you already own, even if they were not bought from Apple. You pair the device with Apple Configurator on an iPhone or a Mac during setup. The device is then erased, added to your inventory and, if you choose, assigned to your device management service. Never use it on a personal phone.
| Device | Minimum requirement | Stop at this setup screen |
|---|---|---|
| iPhone or iPad | iOS 16 or iPadOS 16 or later | Choose a Wi-Fi Network |
| Mac | macOS 12.0.1 or later, with Apple silicon or a T2 Security Chip | Select Your Country or Region |
| Apple Vision Pro | visionOS 26 | Hello |
| Apple TV | Ethernet models only | Uses Apple Configurator for Mac |
The iPhone running Apple Configurator needs iOS 16 or later, according to Apple’s Configurator page (Apple Business User Guide, Add devices using Apple Configurator). Some MDM vendor guides still list iOS 15, so go by Apple’s number.
Steps with Apple Configurator for iPhone
- Install Apple Configurator on an iPhone and sign in with a Managed Apple Account that can manage devices.
- In Settings, choose how the device gets online: Share Wi-Fi, a configuration profile, or Don’t Share.
- Choose the management assignment: None, Default or Specific.
- Erase the target device if it was already set up, then start it and stop at the right setup screen.
- Scan the pairing image on the device, or enter the six-digit code.
- Wait for it to finish, then tap Erase and Shut Down on an iPhone or iPad, or shut down a Mac.
Apple Configurator for Mac
You can also use Apple Configurator for Mac, which many older guides still call Apple Configurator 2. Connect the iPhone, iPad or Apple TV, choose Prepare, then Manual Configuration, and add it to Apple Business. This route is the one to use for an Apple TV with Ethernet.
Route 3: Let Staff Add Devices by Signing In
A staff member can add a device by signing in with their Managed Apple Account. The device then enrolls in your device management service without being erased. This suits company devices people already use, and personal devices under a bring-your-own-device policy. If you run more than one service, set the right default first.
| Enrollment type | Use it for | Supervised |
|---|---|---|
| Account-driven Device Enrollment | Company devices staff already use | Mac yes. iPhone, iPad and Vision Pro no. |
| Account-driven User Enrollment | Personal devices (BYOD) | No |
What you give up
Sign-in enrollment keeps personal data separate, which protects staff privacy. The trade-off is control. iPhones and iPads enrolled this way are not supervised, so you get fewer restrictions than with a device you erased and added through Configurator. For a shared kiosk iPad, Configurator is the better fit.
Staff start this from the device itself. On an iPhone or iPad, they sign in with their Managed Apple Account in Settings. On a Mac, they use System Settings. The exact screens depend on the operating system version, so test the flow on one device before you send instructions to everyone.
When to use it instead of Configurator
Use sign-in when the device holds someone’s photos and messages, or when you cannot take it away to erase it. Use Configurator when the device is new, company-owned and needs full supervision. Darnell’s twelve sealed iPhones were a clear case for Configurator, since there was nothing on them to lose.
Before any route works, your organization has to be verified. Our guide on how long Apple Business Manager verification takes covers what to do if approval is slow.
After You Add a Device: Assign It and Watch the 30-Day Window
After you add a device, assign it to a device management service under Devices, then Inventory. Filter by source to find Configurator devices quickly. Once the device enrolls, the user has a 30-day provisional period in which they can release it from management. After that, it stays managed.
- Go to Devices, then Inventory.
- Filter by Source: Apple Configurator, or search by serial number.
- Select the devices, choose Assign Device Management, pick the service and confirm.
- Set a default service for each device type so future devices assign themselves.
The 30-day provisional period
Apple’s Configurator page says the 30-day provisional period starts after the device is assigned and enrolled. During that time, the user can release the device from Apple Business, supervision and the management service. Plan your handover so staff are not tempted to remove management in the first month.
Do not continue setup too early
Apple warns that for manually added devices using Automated Device Enrollment, you should not continue Setup Assistant after assigning the device. Shut it down instead. When it starts again, it picks up its management settings properly.
Set defaults once
Under Devices, then Management Services, choose a default service for each device type. Apple applies it to devices you add after you save the setting. Devices already in your inventory need to be assigned by hand.
Bulk assignment
You can assign devices in batches by order number, device type or serial number, and Apple’s assignment page allows up to 1,024 serial numbers in one paste. That saves time when a reseller drops a large order into your inventory at once.
Adding Devices When You Use Intune or Jamf
If you manage devices with Microsoft Intune or Jamf, the adding steps are the same. The difference is the assignment. In Apple Configurator, choose Specific and pick the service linked to your MDM. The device is added to Apple Business and passed to that MDM through its service token.
Then the device has to show up on the MDM side. A practitioner guide from CloudInfra, published June 30, 2026, says to open the enrollment program token in Intune and use Sync if a new device does not appear. Jamf and other tools have their own sync step, so check the vendor’s documentation.
Keep the token current
Apple’s service tokens for external MDMs expire after one year. If a token lapses, newly added devices stop flowing to your MDM even though they appear in Apple Business. Replace the token in Apple Business, upload it to the MDM, and then sync again.
Test the whole chain with one device before a big rollout. Add it with Configurator, confirm it appears in Apple Business, then confirm it appears in your MDM with the right enrollment profile. Only then pair the rest.
Pick one place to assign
Decide whether you assign devices in Apple Business or rely on defaults, and stick to it. Mixing both leads to devices landing in the wrong service. For most small teams, a default per device type is the simplest setup.
Why a Device Is Not Showing in Apple Business Manager
A device usually fails to appear for one of four reasons. It was bought from a seller that is not linked, the reseller has not submitted the order, the device was set up past the pairing screen, or it does not meet Apple’s hardware or software minimums. Each has a fix.
| Problem | Likely cause | Fix |
|---|---|---|
| Retail purchase not in inventory | Seller is not linked to your account | Use Apple Configurator, or buy through a linked reseller next time |
| Reseller order missing | Order not submitted | Ask the reseller to submit it with your Organization ID |
| Pairing will not start | Device is past the right setup screen | Erase it and stop at the correct screen |
| Mac will not pair | No Apple silicon or T2 chip, or macOS too old | Use a linked reseller, or retire the Mac |
| Device added but nothing happens | Not assigned to a management service | Assign it under Devices, then Inventory |
Older Macs
Macs without Apple silicon or a T2 chip cannot be added with Apple Configurator. The only route is a reseller that can submit the original purchase. In the 2023 Apple Community thread, the top answer suggested that replacing very old hardware is often the better spend.
Wrong assignment
If a device lands in the wrong management service, unassign it and assign it again. A device already enrolled in the built-in service must be signed out and unenrolled first. For the bigger picture of how accounts, devices and apps fit together, our explainer on what Apple Business is and what it replaced is a good starting point.
Add Apple Device to Apple Business Manager: FAQ
How do I add a device to Apple Business Manager?
Link your Apple Customer Number or reseller under Devices, then Inventory, so purchases appear automatically. For devices bought elsewhere, use Apple Configurator on an iPhone or Mac during setup, which erases the device and adds it. Staff can also enroll a device by signing in with a Managed Apple Account. Then assign the device to your management service so it enrolls on first start.
Can I manually add devices to Apple Business Manager without Apple Configurator?
Partly. A linked reseller or carrier can submit eligible orders, including some past ones, without Configurator. Staff can also enroll a device by signing in with a Managed Apple Account, which does not erase it. For a retail device you want fully supervised and in your inventory, Apple Configurator is the route Apple documents. Ask your reseller first, since that route needs no erase.
How do I add Apple Configurator devices to Apple Business Manager?
Pair the device with Apple Configurator on an iPhone or Mac while it sits on the right setup screen. It is added to your inventory automatically. Then go to Devices, then Inventory, filter by Source: Apple Configurator, select the devices, choose Assign Device Management and pick your service. You can also choose automatic assignment during pairing, which skips the manual step.
How do I add apps to devices in Apple Business Manager?
Buy or get app licenses under Apps and books, then add the apps to a Blueprint with the settings you need. Assign the Blueprint to users, user groups or devices. When a device enrolls, it installs those apps, silently on supervised devices. Apps bought through Apple Business can be revoked and reassigned later when someone leaves. Our guide on how Apple Business Manager works explains Blueprints and app licenses in more detail.
Does adding a device with Apple Configurator erase it?
Yes. Apple’s guide says adding a device with Apple Configurator erases it, so back up anything important first. That is why Apple warns not to add personal devices this way. For a device someone already uses, enroll it by signing in with a Managed Apple Account instead, which keeps personal data separate and leaves photos and messages untouched on the phone.
What iPhone do I need to run Apple Configurator?
Apple’s Configurator page says the iPhone running Apple Configurator needs iOS 16 or later. You sign in with a Managed Apple Account that has device management permissions and allow camera and Bluetooth access. Some vendor guides still list iOS 15, but Apple’s current page is the one to follow. Update the admin iPhone before you start, and charge both devices.
Can I add an old Mac to Apple Business Manager?
Only if it qualifies. Apple Configurator needs a Mac with Apple silicon or a T2 Security Chip running macOS 12.0.1 or later. Older Macs can only come in through a linked reseller that can submit the original order. If neither works, the Mac cannot be added, and replacing it may make more sense. Very old Macs also stop getting security updates.
What is the 30-day provisional period?
After a manually added device is assigned and enrolled, the user has 30 days to release it from Apple Business, supervision and the management service. After that, the device stays managed. Hand devices over with clear instructions, so staff do not remove management by mistake during the first month. A short written note with each device helps explain why it matters.
How long until a reseller order shows up in Apple Business?
Apple’s guide does not give a time. Once you have added the Reseller Number and shared your Organization ID, the reseller must submit the order through its portal. If devices do not appear, ask the reseller to confirm the submission. Then check Devices, then Inventory, and search by serial number. Keep the invoice handy in case the reseller asks for the order number.
Do I need Apple Business Manager to manage iPhones?
Not strictly, but it makes management much easier. Without it, each device must be enrolled by hand and users can remove management. With devices added to Apple Business, they enroll automatically, can be supervised, and stay tied to your company if a person leaves. Apple Business is free, including its built-in device management, so the cost barrier is low for any size of team.
Add Apple Device to Apple Business Manager the Right Way
Back to Darnell and his twelve carrier-store iPhones. He installed Apple Configurator on his own iPhone, set it to share the office Wi-Fi and assign to the built-in management service, then paired each phone at the Wi-Fi screen. Twelve devices took one morning. He also asked the carrier to link its Reseller Number, so the next order would arrive on its own.
So how do you add Apple device to Apple Business Manager in 2026? Link your supplier for anything you buy from Apple, a reseller or a carrier. Use Apple Configurator for retail or second-hand devices, knowing it erases them. Let staff sign in with a Managed Apple Account for devices they already use. Then assign each device to a management service and watch the 30-day window. Set a default service per device type so new devices sort themselves. Which route fits the devices on your desk right now?




